Instruments/Zeiss-Elyra-7.md

@@ -67,17 +67,44 @@ Always make sure that the system is back at 27°C and the CO<sub>2</sub> is off
 
 </details>
 
-## Environmental Control
+## Acquisition Setup
 
-[Zeiss_Elyra_Environmental_controls_01.pdf](uploads/9e4a1088f421fd1742a2dd0076f3a89a/Zeiss_Elyra_Environmental_controls_01.pdf)
+<details>
+
+<summary>
 
-## Setting up Lattice SIM
+### `Setting up Lattice SIM`
+
+</summary>
 
 [Zeiss_Elyra_Setting_up_Lattice_SIM.pdf](uploads/8a812e218450d11bab8caa13642c6510/Zeiss_Elyra_Setting_up_Lattice_SIM.pdf)
 
-## Setting up TIRF
+</details>
+
+<details>
+
+<summary>
+
+### `Setting up TIRF`
+
+</summary>
+
 [Zeiss_Elyra_Setting_up_TIRF_imaging.pdf](uploads/d5abb8b971c53cbf7a21b318be59d1c3/Zeiss_Elyra_Setting_up_TIRF_imaging.pdf)
 
+<details>
+
+<summary>
+
+### `Environmental Control`
+
+</summary>
+
+</details>
+
+[Zeiss_Elyra_Environmental_controls_01.pdf](uploads/9e4a1088f421fd1742a2dd0076f3a89a/Zeiss_Elyra_Environmental_controls_01.pdf)
+
+</details>
+
 ## Dual-Camera Alignment & Colocalization Analysis
 
 Camera Alignment has to be checked/done before **each experiment** using both cameras and for **each used filter** in the camera link and for **each used objective** individually. It has to be done again if the camera was pushed by accident, or if the cover of the camera link has been opened.