Instruments/Zeiss-Elyra-7.md

 [[_TOC_]]
 
+
+# Profile 
+
 ![Elyra](uploads/f53ec5c341f61133fa78aedb7630c39e/Elyra.png)
 
 # Manuals & Guides
@@ -9,7 +12,7 @@
 
 <summary>
 
-#### `Startup`
+## `Startup`
 
 </summary>  
 
@@ -41,6 +44,33 @@ For the front flap you will need to open (to move flap up) and tighten (to keep
 
 <br/>
 
+</details>
+
+<details>
+
+<summary>
+
+## `Shutdown`
+
+</summary>  
+
+
+- Close Zen Black
+- Press the Load position on the touch panel
+- Clean immersion objectives with lens cleaning paper
+
+![Cleaning](uploads/93470e14dd699b18acd95bef9b1d8c97/Cleaning.jpg){width=40%}
+
+Leaving system for the next user
+- Logout from the Windows session
+
+Full shutdown (last user of the day)
+- Shut down the PC
+- Switch off the microscope
+
+Always make sure that the system is back at 27°C and the CO<sub>2</sub> is off when you have done any live cell imaging.
+
+
 </details>
 
 ## Environmental Control
@@ -131,22 +161,7 @@ Channel Alignment has to be done before **each colocalization experiment** using
 5. Save the results in order to correct your images later on
 6. You can apply your correction together with the SIM processing
 
-## Shutdown
-
-- Close Zen Black
-- Press the Load position on the touch panel
-- Clean immersion objectives with lens cleaning paper
 
-![Cleaning](uploads/93470e14dd699b18acd95bef9b1d8c97/Cleaning.jpg){width=40%}
-
-Leaving system for the next user
-- Logout from the Windows session
-
-Full shutdown (last user of the day)
-- Shut down the PC
-- Switch off the microscope
-
-Always make sure that the system is back at 27°C and the CO<sub>2</sub> is off when you have done any live cell imaging.
 
 # Data Processing