Update Zeiss Elyra 7 authored by Nicholas Wedige's avatar Nicholas Wedige
...@@ -7,7 +7,6 @@ ...@@ -7,7 +7,6 @@
# Manuals & Guides # Manuals & Guides
## Startup & Shutdown ## Startup & Shutdown
<details> <details>
...@@ -18,8 +17,6 @@ ...@@ -18,8 +17,6 @@
</summary> </summary>
1. The Elyra microscope has only one switch that needs to be turned on (Main Switch), which is a turn knob. Do not turn any other switches on/off. Next, you will need to switch on the computer under the table. 1. The Elyra microscope has only one switch that needs to be turned on (Main Switch), which is a turn knob. Do not turn any other switches on/off. Next, you will need to switch on the computer under the table.
![PXL_20240320_095753421](uploads/6243a65ae74f7d9c37bec3fa7fe80a35/PXL_20240320_095753421.jpg) ![PXL_20240320_095753421](uploads/6243a65ae74f7d9c37bec3fa7fe80a35/PXL_20240320_095753421.jpg)
...@@ -43,9 +40,6 @@ For the front flap you will need to open (to move flap up) and tighten (to keep ...@@ -43,9 +40,6 @@ For the front flap you will need to open (to move flap up) and tighten (to keep
![PXL_20240320_091545142](uploads/771b95ca313e0a923254dbf26539bca8/PXL_20240320_091545142.jpg){width=50%} ![PXL_20240320_092901039](uploads/abfc3c39fba668f2f6dfff165d7c3a91/PXL_20240320_092901039.jpg){width=48%} ![PXL_20240320_091545142](uploads/771b95ca313e0a923254dbf26539bca8/PXL_20240320_091545142.jpg){width=50%} ![PXL_20240320_092901039](uploads/abfc3c39fba668f2f6dfff165d7c3a91/PXL_20240320_092901039.jpg){width=48%}
<br/>
</details> </details>
<details> <details>
...@@ -56,7 +50,6 @@ For the front flap you will need to open (to move flap up) and tighten (to keep ...@@ -56,7 +50,6 @@ For the front flap you will need to open (to move flap up) and tighten (to keep
</summary> </summary>
- Close Zen Black - Close Zen Black
- Press the Load position on the touch panel - Press the Load position on the touch panel
- Clean immersion objectives with lens cleaning paper - Clean immersion objectives with lens cleaning paper
...@@ -72,33 +65,16 @@ Full shutdown (last user of the day) ...@@ -72,33 +65,16 @@ Full shutdown (last user of the day)
Always make sure that the system is back at 27°C and the CO<sub>2</sub> is off when you have done any live cell imaging. Always make sure that the system is back at 27°C and the CO<sub>2</sub> is off when you have done any live cell imaging.
</details> </details>
<details> ## Environmental Control
<summary>
## `Environmental Control`
</summary>
[Zeiss_Elyra_Environmental_controls_01.pdf](uploads/9e4a1088f421fd1742a2dd0076f3a89a/Zeiss_Elyra_Environmental_controls_01.pdf) [Zeiss_Elyra_Environmental_controls_01.pdf](uploads/9e4a1088f421fd1742a2dd0076f3a89a/Zeiss_Elyra_Environmental_controls_01.pdf)
</details>
<details>
<summary>
## `Setting up Lattice SIM` ## `Setting up Lattice SIM`
</summary>
[Zeiss_Elyra_Setting_up_Lattice_SIM.pdf](uploads/8a812e218450d11bab8caa13642c6510/Zeiss_Elyra_Setting_up_Lattice_SIM.pdf) [Zeiss_Elyra_Setting_up_Lattice_SIM.pdf](uploads/8a812e218450d11bab8caa13642c6510/Zeiss_Elyra_Setting_up_Lattice_SIM.pdf)
</details>
## Setting up TIRF ## Setting up TIRF
[Zeiss_Elyra_Setting_up_TIRF_imaging.pdf](uploads/d5abb8b971c53cbf7a21b318be59d1c3/Zeiss_Elyra_Setting_up_TIRF_imaging.pdf) [Zeiss_Elyra_Setting_up_TIRF_imaging.pdf](uploads/d5abb8b971c53cbf7a21b318be59d1c3/Zeiss_Elyra_Setting_up_TIRF_imaging.pdf)
...@@ -181,8 +157,6 @@ Channel Alignment has to be done before **each colocalization experiment** using ...@@ -181,8 +157,6 @@ Channel Alignment has to be done before **each colocalization experiment** using
5. Save the results in order to correct your images later on 5. Save the results in order to correct your images later on
6. You can apply your correction together with the SIM processing 6. You can apply your correction together with the SIM processing
# Data Processing # Data Processing
## Data Handling and Transfer ## Data Handling and Transfer
... ...
......