Instruments/Zeiss-LSM-900.md

@@ -7,15 +7,15 @@
 
 ### Start-up & Shutdown Guide
 
+When starting up the system, first flick switches (1) and (2), turn the laser key (3) and then start up the PC. 
 
-When shutting the system down, please make sure that the ZEN service is fully shut down. After closing the ZEN software, a window will indicate that the service is closing, make sure you wait until the window closes until you switch everything off. 
 
 ![LSM900_startup](uploads/29e59bc08b70a20ccc387dc72a5f211d/LSM900_startupshutdown.jpg)
 
-When starting up the system, first flick switches 1 and 2, turn the laser key (3) and then start up the PC. 
-
 When shutting down, do the same in the reverse order. 
 
+Please make sure that the ZEN service is fully shut down. After closing the ZEN software, a window will indicate that the service is closing, make sure you wait until the window closes until you switch everything off. 
+
 ### Environmental control
 
 The CO<sub>2</sub> controller and the heating unit are placed on the right-hand side behind the monitor. On top you will find a power switch for turning them on.