Instruments/Zeiss-LSM-980.md

@@ -40,35 +40,6 @@ Installed 2020. Inverse point scanning confocal microscope with up to 6 channels
 - Multichannel Airyscan alignment: 512 x 512 pixels, high speed, optional: line switching
 - MPLX-8Y, CO-8Y: always bidirectional (bidi correction must be selected in Options, autocorrection done from detector signal)
 
-## Manuals & Guides
-### Airyscanning
-- 8 bit, fill about 1/3 to ½ of full range (50-125 counts, a bit more with 8Y-MPLX
-- Multichannel Airyscan alignment: 512 x 512 pixels, high speed, optional: line switching
-- MPLX-8Y, CO-8Y: always bidirectional (bidi correction must be selected in Options, autocorrection done from detector signal)
-### Startup & Shutdown Guide
-#### Startup
-1. Turn the Main Switch (1) in ON position
-2. Turn the Laser key (2) clockwise in vertical position (labeled "Laser")
-3. Push the Components switch (3) in ON position
-4. Power up the PC (4). Login into the "user" account and start ZEN
-5. Press the Load position button on the touch panel of the microscope
-
-![image](uploads/85fc29131f4a43a3594237567465d1c3/image.png){width=75%}
-
-#### Shutdown
-1. Close ZEN
-2. Press the Load position button on the touch panel
-3. Clean immersion objectives with lens cleaning paper
-##### Leaving the system for the next user
-4. Logout from the Windows session
-##### Full shutdown (last user)
-4. Shut down the PC (4)
-5. Push the Components switch (3) in OFF position
-6. Turn the Laser key (2) counter-clockwise in horizontal position (labeled "OFF")
-7. Turn the Main Switch (1) in OFF position
-8. Cover the microscope with the dust cover
-
-
 ### Sample Preparation
 
 ### User Manual